Defender™ Cell Automated Barrier Door
Automated high-security system controlling access to sensitive areas. Robust protection against intrusion while ensuring the safe movement of authorized personnel.
40" (1020 mm) per second of operation ; up to 60" (1524 mm) per second with optional VFD controls
40oz (1134g) Armorplex™ Vinyl Coated Polyester Curtain Material, Fire Resistant (NFPA 701 Small Scale Test), High Tensile Strength Conforming to ASTM Tests, in Black Color. 18" x 18" (457 mm x 457 mm) PVC framed window. Fully waterproof UHMW Barrier Tabs™, 450 lbs (204 kg) breakout force
1 HP (0.75 kW) motor, TEFC, IP55 rating, UL and CSA listed
Padded safety edge technology protecting people and property. Gravity descent function, non-motorized downhill
Continuous use design for millions of cycles
Relay Control Pack : Open/Close/Stop buttons with full controls. Optional PLC control package : Open/Close/Stop buttons with advanced VFD controls.
Reduce the potential risk of injury from:
- Impact of rotating or moving parts
- Inward Hazard Entrainment
- Debris Flying
- Unexpected movement of automated machines
Point of operation and perimeter protection provides:
- Improved security
- Enhanced protection
- Increased productivity
Panels : 8-gauge steel welded wire mesh – 2 1/2" x 1 1/4" (64 mm x 32 mm) mesh, black powder-coated
Posts : 2" x 2" (51 mm x 51 mm) 16 gauge square tubular steel with 2" x 6" x 1/4" (51 mm x 153 mm x 6 mm) anchor base plate, yellow powder-coated
Doors : 3" wide x 8" high (914 mm x 2438 mm) hinged or sliding doors, compatibility with major brand interlocks available
OSHA Standard 29 CFR 1910.212 (a)(1) provides that machinery guarding procedures must be in place by the employer to PROTECT THE OPERATOR and other employees in the machine area from ACCIDENTAL CONTACT WITH MOVING PARTS of the machine.
OSHA Standard 29 CFR 1920.212 (a)(3)(ii) states that the POINT OF OPERATION of machines whose operation exposes the operator to injury MUST BE PROTECTED.
OSHA Standard 29 CFR 1920.212 (a)(3)(ii) also provides that the PROTECTIVE DEVICE must comply with any applicable standard and, in the absence of specific standards, must be designed to PREVENT ANY PART OF THE BODY FROM ENTERING THE DANGER ZONE DURING THE OPERATING CYCLE.
Videos
